In this example we will be updating the drivers for the HP Designjet 500, the process of adding a printer /updating a printer is the same for all printers in Windows 10
Download the printer driver bundle here: hpdj500wx64pclen.zip
Updating the Drivers
Click on the Start Button (lower left corner), and type in Devices and Printers
The Devices and Printers dialog will open, listing the devices and printers installed on your computer. (note this will be different for each computer)
To make sure all old drivers are removed,
select the printer by left clicking, and then click Remove Device
Click Yes to remove the device. The printer will be removed.
To reinstall the printer, click on the Add Printer button.
Windows will then scan for printers attached to your computer, either physical attached or on your network.
This searching might take some time, so its advisable, to click on The printer that I want isn't listed.
Depending on how the computer is connected to your computer, select the correct settings. Then click Next.
Once you have configured the settings, the wizard will show all the drivers supported. We will now select Have Disk
Browse to the folder where the drivers were saved or extracted. Follow the prompts to install the new driver. Then when finished installing Click Print test page to check that the basic functionality of the driver.
Testing the Drivers
To see if the printing works, there is a simple check within AllyCAD or Civil Designer.
Open the program
Open a drawing, go to the File Menu > Print Setup, make sure the correct printer is selected.
Then go to the File Menu > Print Preview, if you see the preview, then the printer is working correctly.
print friendly version